Perbandingan Retrofit Seismik Struktur Baja Eksisting dengan X-Bracing Dan Inverted V-Bracing

Muhammad Iqbal Habibi Kamal, Sri Wanto, Nurul Firkhati Hidayah

Abstract


Indonesia is a country that is at the meeting point of three of the Earth's main plates, namely the Indo-Australian Plate, the Eurasian Plate and the Pacific Plate, which are currently actively moving. The plate that really influences the situation around the Java region is the pushing of the Indo-Australian plate towards the Eurasian plate. This situation causes the formation of many volcanoes in Sumatra, Java, Bali and Papua, and active movements between plates often cause earthquakes in these regions. Indonesia's geographic location has a high risk of earthquake impacts, but the rapid development and growth of infrastructure can affect the service life of a building structure. Earthquakes are unpredictable dynamic loads, especially for buildings designed according to old design codes and standards, which are vulnerable to earthquake loads. To achieve satisfactory global seismic behavior, it is necessary to evaluate the existing structure and add appropriate reinforcement. This paper analyzes the strengthening of steel structures using X-Bracing and Inverted V- Bracing BRB with the Pushover Analysis Method. The results of this research are presented in the form of a fragility curve which describes the probability of damage before and after strengthening the X-Bracing and Inverted V- Bracing BRB. By knowing the overall structure in the form of a capacity curve, it is possible to rationally evaluate retrofitting strategies.

Keywords


X-Bracing BRB, Inverted V-Bracing, phusover analysis, fragility curve, capacity curve

Full Text:

PDF

References


Almeida, A. et al. (2017) “Seismic retrofit of RC building structures with Buckling Restrained Braces,” Engineering Structures, 130. Tersedia pada: https://doi.org/10.1016/j.engstruct.2016.09.036.

Badan Standardidadi Nasional (2019) “perkembangan ilmu pengetahuan dan teknologi , pemeliharaan dan penilaian kelayakan dan bangunan gedung dan nongedung sebagai revisi struktur bangunan gedung dan nongedung ; Lembaran Negara Republik Indonesia Tahun,” Sni 1726 : 2019, (8), hal. Herman Kurnianto, D., Teoretis dan Terapan Bidan.

Balkamou, N. dan Papagiannopoulos, G. (2024) “Seismic Upgrade of an Existing Reinforced Concrete Building Using Steel Plate Shear Walls (SPSW),” Applied Sciences (Switzerland), 14(1). Tersedia pada: https://doi.org/10.3390/app14010443.

Bruschi, E. dan Quaglini, V. (2024) “Assessment of Non-Linear Analyses of RC Buildings Retrofitted with Hysteretic Dampers According to the Italian Building Code,” Applied Sciences (Switzerland), 14(7). Tersedia pada: https://doi.org/10.3390/app14072684.

Bruschi, E., Quaglini, V. dan Zoccolini, L. (2023) “Seismic Upgrade of Steel Frame Buildings by Using Damped Braces,” Applied Sciences (Switzerland), 13(4). Tersedia pada: https://doi.org/10.3390/app13042063.

Cristina, C. et al. (2017) “Seismic retrofiting of an existing steel structure,” in International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM. Tersedia pada: https://doi.org/10.5593/sgem2017/62/S26.051.

Devi, R.H., Sangadji, S. dan Saifullah, H.A. (2020) “Fragility curve of low-to-mid-rise concrete frame retrofitted with FRP,” in E3S Web of Conferences. Tersedia pada: https://doi.org/10.1051/e3sconf/202015603006.

Farzampour, A. et al. (2023) “Development of Innovative Lateral Resistance Systems Featuring Earthquake-Protective Dampers,” Applied Sciences (Switzerland), 13(6). Tersedia pada: https://doi.org/10.3390/app13063852.

Gandelli, E. et al. (2023) “Seismic Retrofit of Warehouses with Masonry Infills and Glazed Curtain Walls through Hysteretic Braces: Refinement of the Italian Building Code Provisions,” Applied Sciences (Switzerland), 13(15). Tersedia pada: https://doi.org/10.3390/app13158634.

Hapsari, I.R. et al. (2023) “Damage States Investigation of Infilled Frame Structure Based on Meso Modeling Approach,” Buildings, 13(2). Tersedia pada: https://doi.org/10.3390/buildings13020298.

Hu, S. dan Wang, W. (2021) “Comparative seismic fragility assessment of mid-rise steel buildings with non-buckling (BRB and SMA) braced frames and self-centering energy-absorbing dual rocking core system,” Soil Dynamics and Earthquake Engineering, 142. Tersedia pada: https://doi.org/10.1016/j.soildyn.2020.106546.

Jiang, S. et al. (2024) “Assessment of Soft-First-Floor Structures Reinforced by Rocking Frame Based on Seismic Resilience,” Buildings, 14(1). Tersedia pada: https://doi.org/10.3390/buildings14010197.

Kim, M.S. dan Lee, Y.H. (2023) “Seismic Behavior of Concrete Columns Retrofitted with a Brace-Type Replaceable Steel Link,” Materials, 16(3). Tersedia pada: https://doi.org/10.3390/ma16031182.

Lee, B.G. et al. (2023) “Seismic Capacity of R/C Buildings Retrofitted with a V-Bracing System Equipped with a Novel Laterally Layered Friction Damper,” Applied Sciences (Switzerland), 13(24). Tersedia pada: https://doi.org/10.3390/app132413205.

Moreira, R.F., Castro, J.M. dan Varum, H. (2022) “On the Applicability of Conventional Seismic Design Methodologies to Hybrid RC‐Steel Systems,” Ce/Papers, 5(2), hal. 162–171. Tersedia pada: https://doi.org/10.1002/cepa.1711.

Rahma, M. et al. (2023) “Evaluating Retrofitting Strategies of Low-to-Mid-Rise Reinforced Concrete Structure Based on Its Seismic Fragility,” International Journal on Advanced Science, Engineering and Information Technology, 13(2). Tersedia pada: https://doi.org/10.18517/ijaseit.13.2.17480.

Ro, K.M., Kim, M.S. dan Lee, Y.H. (2024) “An Experimental Study on the Seismic Performance of a Replaceable Steel Link System Acting as a Structural Fuse,” Applied Sciences (Switzerland), 14(6). Tersedia pada: https://doi.org/10.3390/app14062358.

Sahoo, D.R., Patra, P. dan Jain, A.K. (2023) “Advances and Challenges in Design of Connections in Steel-Braced Frame Systems with In-Plane Buckling Braces,” Applied Sciences (Switzerland), 13(6). Tersedia pada: https://doi.org/10.3390/app13063959.

Shmerling, A. dan Gerdts, M. (2022) “A Design Methodology for the Seismic Retrofitting of Existing Frame Structures Post-Earthquake Incident Using Nonlinear Control Systems,” Buildings, 12(11). Tersedia pada: https://doi.org/10.3390/buildings12111886.

Sumedi, P.P., Sangadji, S. dan Saifullah, H.A. (2023) “The fragility curve of low-to-mid-rise steel frame buildings retrofitted with inverted V-bracing,” in AIP Conference Proceedings. Tersedia pada: https://doi.org/10.1063/5.0128995.

Titirla, M.D. (2023) “A State-of-the-Art Review of Passive Energy Dissipation Systems in Steel Braces,” Buildings, 13(4). Tersedia pada: https://doi.org/10.3390/buildings13040851.

Wanto, S., Sangadji, S. dan Saifullah, H.A. (2023) “Seismic retrofitting of existing steel structures with X-bracing,” AIP Conference Proceedings, 2482(February). Tersedia pada: https://doi.org/10.1063/5.0112776.

Zaker Esteghamati, M. dan Farzampour, A. (2020) “Probabilistic seismic performance and loss evaluation of a multi-story steel building equipped with butterfly-shaped fuses,” Journal of Constructional Steel Research, 172. Tersedia pada: https://doi.org/10.1016/j.jcsr.2020.106187.


Refbacks

  • There are currently no refbacks.